What is needed to make the rear shocks manually adjustable

Shop deals on ebay
shop deals on amazon
Advertise with us
Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Might be able to find and mount hoses from 80-81 standards to them. That would put the fill valve by the rear master under the right side cover.
 
Grainger has the brass air tank filler valve for $2.98 + shipping. It has NPT 1/8 threads, so a metric adapter is needed to fit the air shock inlet. I know the adapter is available because I have two on my trike. I just don't remember where I got the adapter fittings.

https://www.grainger.com/product/1X361& ... 18124905:s

If you need examples on rigging the hoses, take a look at an 85 Interstate because it has air shocks and no compressor.

Tom
 
PurpleGL1200I":3n35c4k1 said:
Grainger has the brass air tank filler valve for $2.98 + shipping. It has NPT 1/8 threads, so a metric adapter is needed to fit the air shock inlet. I know the adapter is available because I have two on my trike. I just don't remember where I got the adapter fittings.

And exactly what I need is the metric size so I can but it and the use a common air valve! i am sure there are metric to SAE available but what size?

https://www.grainger.com/product/1X361& ... 18124905:s

If you need examples on rigging the hoses, take a look at an 85 Interstate because it has air shocks and no compressor.

Tom
Click to expand...
 

Latest posts

Top