GL1200 clutch issue

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

teal_wing

Active member
Joined
Sep 28, 2013
Messages
27
Reaction score
0
Location
Grand Rapids MI
clutch is firm at startup, but sitting at light noticed the clutch play was gone before engaging. Clutch tight against hand grip and bike creeping ahead. :headscratch: ordered repair kit and hope that will fix it. I did bleed the system and did not notice any cracks or leaks. Anybody have this situation before? going to a nascar race next week and hope it gets fixed in time :beg:
 
had to, PO had no idea what to do on a bike other then ride it. I changed the belts, oil, carbs redone, new paint, tires , front springs, triple tree head bearings, just about everything.
 
Try back bleeding it. Pump fluid through the clutch slave up to the master with the banjo loosened just enough to seep. Last pump of fluid tighten banjo as you pump it in.
 
[url=https://www.classicgoldwings.com/forum/viewtopic.php?p=192618#p192618:2b6xf624 said:
teal_wing » 7 minutes ago[/url]":2b6xf624]
hey Dan, my thoughts also, thats why I ordered a kit.
Seals in slave could leak past also. I'd do both and be done with it.
 
Top