Due to a sweaty head in my full face on hot days, I had already cut my windshield down to 20" high. That didn't help much although I like the look much better than a tall shield.
One more try. I installed two round Vetter vents and once again the air flow wasn't all I had hoped for. The vents work well as far as snapping open and closed.
The procedure was straight forward. I covered the area with painters tape, drilled the pilot hole first and then cut out the 3 1/4" hole. the air seems good through the vents but dissipates about 12" from the shield and my face is about 18" back. :head bang:
I don't plan to give up riding OR my full face so maybe I'm just stuck with a wet head! :headscratch: :smilie_happy:
One more try. I installed two round Vetter vents and once again the air flow wasn't all I had hoped for. The vents work well as far as snapping open and closed.
The procedure was straight forward. I covered the area with painters tape, drilled the pilot hole first and then cut out the 3 1/4" hole. the air seems good through the vents but dissipates about 12" from the shield and my face is about 18" back. :head bang:
I don't plan to give up riding OR my full face so maybe I'm just stuck with a wet head! :headscratch: :smilie_happy: