cover

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

medcoman

Well-known member
Joined
Oct 19, 2011
Messages
55
Reaction score
0
Location
ohio
My Bike Models
1982 goldwing standard
Hi everyone
I'm having a problem getting the cover off to fix the water pump seals. I've got the bottom loose but the cover won't come loose at the top. Any one with help?
 
Yes that's an excellent post by Roady, all of his are.

medcoman, you might need to rap it with a mallet to break the seal loose.
Compare the screws you have out with the above how-to first.
Have a pan under it to catch oil and antifreeze.
 
Hi gang
My bad. There was a resessed bolt that I didn't see on the top of the cover. Took out the bolt and the cover popped right off. Cleaned all surfaces and will put the new o-rings and gaskets on Friday. Thanks for the good illustrations.
 
Top