Recent content by winger86

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. winger86

    put engine back in bike after replacing stator

    Brian Thanks for the pic. there were only 2 sets of wires that were disconected to get the motor out , they were crossed from the left side connections down to the right side of the engine , and they are both connected. all wires are connected including the three sensor wires that were on...
  2. winger86

    put engine back in bike after replacing stator

    ive looked and found the gear shift sensor and a relay and none of the wires connected to it even come close to anything the book even says I never touched any of these wires at least not up there on the rt side of ignition unit only wires we touched were those neccessary to remove the engine
  3. winger86

    put engine back in bike after replacing stator

    Ive looked at all connectors over there all are connected and some r going into main harness I cant seem to find any with those color wires in it Just where does the neutral switch and overdrive lite connect on the engine and are they the same wire or wires
  4. winger86

    put engine back in bike after replacing stator

    what do these plugs look like are they the same wire or is it the round double plug on the top of the engine near the timing belts all plugs and wires seem to be attached
  5. winger86

    put engine back in bike after replacing stator

    after repairing the stator and reinstalling the engine now I have three small problems 2 of which may be related first the neutral light dosent come on and the clutch must be pulled in to start second the high gear light also dosent come on third after riding bike i may stop real...
  6. winger86

    melted stator plug & wires

    hello again so ive gotten the engine out of the my 1986 GL 1200I to replace the stator when i went to unplug it from under the seat the wires were all burnt and the plugs melted together well 2 of three wires were burnt any insight as to what caused it? I have been running it without the...
  7. winger86

    1986 Goldwing Interstate OEM Stators

    the poorboy method seems like a great way to go where can i get schematics for the modification and other neccessary parts as wel las detailed instructions for the modify
  8. winger86

    1986 Goldwing Interstate OEM Stators

    thanks brian for the return how long ago did you change it, Do you know anything about this alternator addition I saw on other threads about the same stator issues
  9. winger86

    1986 Goldwing Interstate OEM Stators

    Hi All Im here in n eastern PA Ive been a winger for almost 7 yrs now This bike has become my best ride only it needs a new stator I have been warned that most if not all aftermarket stators are worthless does anyone know where I can find an OEM or a reputible afermkt part that will last...
Top