Search results

Ok. So i got dad a new fuel pump off ebay, the wireing harness was too short to go up under the false tank. So i cut em and spliced in the old harness. Now it will smoke up by the handlebars when i turn the key. Triee changing the wires around still doin it.

Dads bike, this aspencade, idles fine. Rev the throttle and great reponse. But when put it in gear to go once you start to go when you turn the throttle it bigs down and dies.

So the carbs being dirty and all that would cause a knock sound? I know it has sat for long time. And i know carbs need cleaned and adjusted and the oil needs to be changed but all that would cause a knock sound?

Ok i cant really ride it. It barely stays started without choke. When i go to hit the throttle it just dies. Carbs def need adjusted. Smokes like crazy. Im hoping thats just all that crap burning ofd in there.

Ok. So how would.i go about getting rid of that knock and ticking? I did put some mmo in the gas and the oil. Right now the oil is not the 10w40 recommended in the manuel but 20w50. Its all inhad around the house and just wanted to get something in it to see if it would start. Plan on...

Ok. So i took the cap off the old starter and looked at it. Putnit back together and now the damn thing works. Lol. All that for nothin. So i apologize to you all but you did help me a great deal and i learned alot bout these old goldwings. So i got the engine in and got it started. Heres...

Yes. I watched a video and got confused about which way the chain is supposed to move. I figured since when i turn thr crank counterclockwise the chain and starter move thats the way it should spin. But ive been told that is wrong. So when i hook it up right the starter motor spins but the...

Ok. So if i got the timing set and i can turn the crank but the chain wont move the starter clutch even with the starter goin the right other way what is that issue? It cant be because im not getting enough juice because ive hooked it to a battery charger/starter and the battery in my blazer.

If it turns the other way the chain dont move.

Heres a video of my issue as of now. https://youtu.be/dlsYPBRmIzw

The chain turns just how it should both on and off the starter. Which is counterclockwise. It does not turn clockwise. The problem is when it does turn counterclockwise the starter cluch does not move. However if i turn it by hand both the chain and starter clutch move.

No the clutch never did turn with the chain. When i crank it by socket the chain and clutch turn. When i mive rhe chain by hand the clutch does not turn. When i hook the starter up oy chain and starter move. Not the clutch. Only time the starter clutch moves is when i turn the crank on the...

Ok did that. Now the starter and chain are still moving one direction only and the starter clutch itself is not moving.

Ok so after all is said and done, once i get the starter clutch back om i should be able to hook the starter up and test it right? Or will i not know till i put it back in?

Do you have the link?

Ok i will give that a try. Thank yourl for the response. Id omagine that it would be countee clockwise since that is the way it engages.

Ok, so i got the starter clutch off and looked at the srpings and rollers. They all seem to in good workomg oder. Soni cleaned the hell out of them and lubed everything up. The quration i have now is how do i get the damn thing back on? I seen the video of the guy using the straws to hold...

Ok will check that. Tried to sync the carbs and just can not get it how it should be.

Ok my dad just bought a 1984 aspencade. It idles fine and when riding it accelerates through 3rd gear, but when hit 4th and OD we can not get it past 55 mph. Lucky if we can. What would cause this? I put some seafoam in the gas and running it and driving it little here and there. Letting it...

Ok thats what i was thinking. Ill take it apart and have a look. Thanks everyone for the help.