Forums
New posts
Search forums
What's new
New posts
New media
New media comments
Latest activity
Gallery Index & Tech Ref
Goldwing Trivia
Goldwing- The First 20 Years
From Japan to USA
Goldwing Magazine Articles
Two Wheel Magazine 1975- Honda's GL1000, The Future
Cycle Illustrated, Nov. 1975- 2 Big Ones From Honda
1977 Model GL1000 Setup Instructions
Owners Manuals
GL1000
1975 GL1000
1978 GL1000
GL1100
1980 GL1100 Standard
1981 GL1100 Interstate
1982 GL1100 Aspencade
1982 GL1100 Interstate
1982 GL1100 Standard
1983 GL1100 Aspencade
1983 GL1100 Interstate
GL1200
1984 GL1200 Standard
1986 GL1200 Interstate
1987 GL1200 Aspencade
GL1500
1987 GL1200 Aspencade
Service Bulletins and Recalls- All Models
GL1000
GL1000- Important GL1000 Service Reminder (1 Page) 6-13-1975
SL #108 Tire and Wheel Rim Matching Information 6-20-75 (7 pages)
Service Tools Newsletter 7-31-75 (2 pages)
SB 1000 #3 Pressurised Cooling System Tester 10-10-75 (3 pages)
SB 1000 #1 Cylinder Head Core Plug Leakage- Revised 7-9-76 (3 pages)
SL #117 Exhaust Pipe and Muffler Paint Damage 9-30-76 (1 page)
SL #118 Instrument Troubleshooting 10-27-76 (5 pages)
PB 1000-2 Changes to Clutch Components 11-3-76 (1 page)
PB 1000-3 Changes to Right Front Engine Cover 1-5-77 (1 page)
SB 1000 #11 Final Drive Gear Case Cover Change 10-15-77 (1 page)
SB 1000 #12 New Main Bearing Caps 11-23-77 (1 page)
SB 1000 #13 Recall to Replace Rear Brake Pads 3-21-78 (5 pages)
SB 1000 #14 Cylinder Head Bolt Torque Change 11-8-78 (1 page)
GL1200
Special Consumer Report: 1984 and 1985 GW Rear Hub
New media
New comments
Search media
Members
Registered members
Current visitors
Log in
Register
What's new
Search
Search
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
General Discussion
General Chit-Chat
Dual Weber IDF 40 Setup - What's it worth?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support Classic Goldwings:
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Message
<blockquote data-quote="desertrefugee" data-source="post: 194253" data-attributes="member: 1727"><p>Well, I've got what I believe is a pretty complete list of parts needed to get these things configured. The bits that were included were a mish-mash with only a complete config for one carb. I need all jets and rubbers for the other. The "other" has no main venturi's installed, but I have the 28's to go in. </p><p></p><p>...and that brings me to my first problem. The auxiliary venturi's are really stuck in these babies. In fact, that might just be why the last guy gave up. As you can see in this photo, the one on the left was partially pulled out and seems to be stuck there. You can't see it in this photo, but both of these auxiliary venturi's are also rotated slightly clockwise a few minutes.</p><p>[ATTACH=full]15466[/ATTACH]</p><p>Is there a trick to getting these stinking things out? I'd like to have the carbs ready to go when garage season is here. Besides one full kit (~$25) I need jets for the unit above.</p><p></p><p>I just need to decide what I want to do with the manifolds: natural, powder coat, paint or chrome.</p><p>[ATTACH=full]15467[/ATTACH]</p></blockquote><p></p>
[QUOTE="desertrefugee, post: 194253, member: 1727"] Well, I've got what I believe is a pretty complete list of parts needed to get these things configured. The bits that were included were a mish-mash with only a complete config for one carb. I need all jets and rubbers for the other. The "other" has no main venturi's installed, but I have the 28's to go in. ...and that brings me to my first problem. The auxiliary venturi's are really stuck in these babies. In fact, that might just be why the last guy gave up. As you can see in this photo, the one on the left was partially pulled out and seems to be stuck there. You can't see it in this photo, but both of these auxiliary venturi's are also rotated slightly clockwise a few minutes. [ATTACH type="full" alt="IMG_5205.JPG"]15466._xfImport[/ATTACH] Is there a trick to getting these stinking things out? I'd like to have the carbs ready to go when garage season is here. Besides one full kit (~$25) I need jets for the unit above. I just need to decide what I want to do with the manifolds: natural, powder coat, paint or chrome. [ATTACH type="full" alt="IMG_5204.JPG"]15467._xfImport[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
General Discussion
General Chit-Chat
Dual Weber IDF 40 Setup - What's it worth?
Top