Basic wiring

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

oldgold80

Member
Joined
May 16, 2020
Messages
7
Reaction score
0
Location
IL
I am new here, and have a 1980 1100. I would like to know if anyone here has a basic wiring diagram. I have the engine on a stand and would like to be able to start it. Just a basic on/off and ignition is what iI would like. Thanks for any help.
 
thank you, I understand that it may be a little complicated, but there has to be a solution somewhere. I can run a late model Harley using 4 or 5 wires, I just need a little guidance
with this engine.
 
Yellow wire goes to the neg side of the 1/2 coil and the blue goes to the 3/4 coil.the black/white wires are the hot wires.I know there is a harness that goes to the pulse generator but I'm not near my bike atm.ill look at it in a little while

Sent from my LM-X420 using Tapatalk
 
If you can see this,it will guide you
4facaac261217d53e985fcb3b5a4c025.jpg


Sent from my LM-X420 using Tapatalk
 
True,if you don't have them,you can try the gm module trick

Sent from my LM-X420 using Tapatalk
 
Thanks a bunch, this helps, it will get me started in the right direction.
 

Latest posts

Top