GL1200 Stator Test Procedures

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

brianinpa

Well-known member
Supporting Member
Joined
Sep 12, 2012
Messages
6,107
Reaction score
5
Location
Lebanon, PA
I think I have cooked the stator in my 84 Standard :crying: so I am looking for the testing procedures. I had a png file of it in a previous post, but that link seems to be broken. The motor that is in the bike has about 70K miles on it, so I really am not that surprised if it is gone, but I want to at least make sure before I pull the darn motor out of the frame.
 
I think this pretty much sums it up. Ansimp has an additional check using a current load, maybe he'll post.

(Gallery link https://classicgoldwings.com/forum/gallery/image_page.php?album_id=1555&image_id=26262 )

image.php
 
If this was my 87 Interstate, that would be my first choice. Since this is my 84 Standard... :nea: Luckily, the stator is putting out more than 50V on all three legs, so I kept looking until I found this:

image.php
 
[url=https://classicgoldwings.com/forum/viewtopic.php?p=219559#p219559:1uk8rnu1 said:
brianinpa » Fri Oct 09, 2020 10:59 am[/url]":1uk8rnu1]
If this was my 87 Interstate, that would be my first choice. Since this is my 84 Standard... :nea: Luckily, the stator is putting out more than 50V on all three legs, so I kept looking until I found this:

image.php
I have the right tools to fix those connectors if you order a new connector and pins.
 
[url=https://classicgoldwings.com/forum/viewtopic.php?p=219574#p219574:2p7230vy said:
mcgovern61 » Sat Oct 10, 2020 1:53 pm[/url]":2p7230vy]
[url=https://classicgoldwings.com/forum/viewtopic.php?p=219559#p219559:2p7230vy said:
brianinpa » Fri Oct 09, 2020 10:59 am[/url]":2p7230vy]
If this was my 87 Interstate, that would be my first choice. Since this is my 84 Standard... :nea: Luckily, the stator is putting out more than 50V on all three legs, so I kept looking until I found this:

image.php
I have the right tools to fix those connectors if you order a new connector and pins.

I am looking for the parts :hi:
 
I use these automotive connectors all the time and they are great but the actual female crimps Loose some tension on the male spades with age and create a poor connection which in turn generates heat through arcing.
 
[url=https://www.classicgoldwings.com/forum/viewtopic.php?p=219594#p219594:23ak4nit said:
mcgovern61 » Mon Oct 12, 2020 3:55 am[/url]":23ak4nit]
I am looking for the parts :hi:

I got all of my connectors, spades and tools from Vintage Connections:

https://vintageconnections.com/
:good:
My auto electrical wholesalers carry a full range. :yes:
 

Latest posts

Top