Mirror bolt nut

shop deals on amazon
Shop deals on ebay
Advertise with us
Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Dusterdude

Dusterdude

Well-known member
Supporting Member
Joined
Oct 6, 2013
Messages
1,456
Reaction score
73
Location
Hopewell,va
My Bike Models
1949 panhead,1972 cb750,1980 gl1100,1985 gl1200,1998 cbr600f3 and 2003 vulcan 1600 classic
I can't find the part number for the nut that goes in the fairing that the mirror bolt threads into.can anyone help?the parts diagrams are a little confusing.
05d7141f46d4d918a88de7a6bf784179.jpg
074a63263b9544c14a1815dfb09711be.jpg


Sent from my LM-X420 using Tapatalk
 
Those are the bolts,I need a nut.I wonder if its included in the mirror base,64531-MG9-770.number 18 in the fiche.

Sent from my LM-X420 using Tapatalk
 
Had a look at mine, nuts are part of the mirror base. Remove radio speaker to get access to the inside. You can also take the base off, and weld a nut to the base, install base and use.
 
That's what I thought red,the base is hard to find,so I'm going to put a flange nut behind it and tighten em up

Sent from my LM-X420 using Tapatalk
 

Latest posts

Top