viragocafe
Member
We are basically stripping the bike(s) down to build cafe racer(s) and there are a ton of good parts we don't want to go to waste. The previous owner took really good care of the 1981 bike. I believe he rebuilt the forks and brake calipers not long ago. The burgundy paint looks to be in good condition besides a few scratches here and there (see left side of front fairing). We will be mostly using just the frame, motor, fake tank, side covers, real tank, fenders (possibly), rear wheel (possibly). But the entire front end, minus the switches on handle bars (at least until we can get the wiring diagram drawn out so an after market set can be installed), if we go with an M.unit which is highly probable then the complete wiring harness is up for grabs. The 1983 we are picking up in 2 weeks but it was apparently just kept in storage for years, so it just needs a bath. The 1980 is already naked, so basically just the complete front end will be extra, along with the wiring harness and maybe some other odds and ends. Which the same goes for the other bikes. If you need something just ask, the worst we can say is someone already beat you to it. You can email me direct at [email protected].
We mainly build cafe racers, so the other bikes will be parted out in the same manner such as the 1983 GL1100 we are picking up next week. After doing fork swaps we still have the front ends from the 1980 GL1100, 1975 GL1000, 1980 CX500, and few viragos available as well. If you are interested in any parts from the bikes we currently have listed and being worked on feel free to message me. As long as it's not frame and motor, or something you would normally see on a cafe racer then most likely if we still have the parts they will be up for sale. Either way it won't hurt to ask, it's the squeaky wheel that gets the grease, right?
We currently are looking for nice set of 1976 GL1000 758a carbs we can rebuild and use on one of our bikes, if you have a set we are open to trades or even just buying outright. We are located in Everett, WA 98204. https://www.ViragoCafe.com. Thanks for viewing!
We mainly build cafe racers, so the other bikes will be parted out in the same manner such as the 1983 GL1100 we are picking up next week. After doing fork swaps we still have the front ends from the 1980 GL1100, 1975 GL1000, 1980 CX500, and few viragos available as well. If you are interested in any parts from the bikes we currently have listed and being worked on feel free to message me. As long as it's not frame and motor, or something you would normally see on a cafe racer then most likely if we still have the parts they will be up for sale. Either way it won't hurt to ask, it's the squeaky wheel that gets the grease, right?
We currently are looking for nice set of 1976 GL1000 758a carbs we can rebuild and use on one of our bikes, if you have a set we are open to trades or even just buying outright. We are located in Everett, WA 98204. https://www.ViragoCafe.com. Thanks for viewing!