dave1135

Thanks for the tips. The fuse block terminals have 12+ on both sides, I do have power to the horns, just nothing to the turn signal...

Grounds first, switches second, trace each wire till the power won’t go through.

Make sure the fuse is making contact on both ends, those clips corrode and loose connection.

Thanks, I've got power thru the 10 amp fuse for the turn signals and brake lights, but no power at the Individual wires that power them...

Well, I took a close look at the carburetors today, and I found why the throttle screw was off the stop, the #3 carburetor, that had the...

Ok, thanks. The throttle plates are closed, thought it was weird that the throttle screw was off the stop. These carbs have not been on...

I'm putting my bike back together after a 4 month restoration, I've rebuilt the carbs(30 year small engine/dealer here) I was checking...

Since the eclipse of the sun I have not had a bike to ride. My engine gave up the ghost a day or so after the eclipse. I bought a used...

I mentioned in one post that I was going to change the lights in my gauge cluster and they are in and I just need to put it all back...

On the way home after buying it back in july

I'm David, I had a 1976 gl1000 back in the late 90s, but was forced to sell it. I've grown up on motorcycles since I was 8 years old...

I'm David, I had a 1976 gl1000 back in the late 90s, but had to sell it. I found a 1982 gl1100 back in July, what started as a fix it up...