ckahleer
Active member
78 GL1000. The brake lever starts engaging the brakes about 3/4 way in. If I squeeze hard it will go all the way to the grip. I rebuilt both calipers and master cylinder with K&L kit 32-1324.
I bleed the brakes until clean fluid and no air was comming out of bleed valves. I reverse bleed by filling a 60cc syringe with fluid and pushed from bleed valve into m/c. Also burped all 6 banjo bolts. Is there somewhere air may still be trapped?
Have others had success with the K&L 32-1324 kit? The parts I installed from the kit looked identical to the parts I removed. I suspect the same kit was installed by a PO.
I bleed the brakes until clean fluid and no air was comming out of bleed valves. I reverse bleed by filling a 60cc syringe with fluid and pushed from bleed valve into m/c. Also burped all 6 banjo bolts. Is there somewhere air may still be trapped?
Have others had success with the K&L 32-1324 kit? The parts I installed from the kit looked identical to the parts I removed. I suspect the same kit was installed by a PO.
Last edited: