Search results

You need to do more research as Rotella t6 is also designed for gasoline engines as well.

The last 2 I rebuilt I ordered them through www.dimecitycycles.com

Yes, clockwise because counter clockwise will loosen the bolt. Also it has to remove the spark plugs.

I've been told some carbs have them external and some don't. Mine sets beside the idle jet. They look identical, the idle is the one slanted and the power jet is sticking straight out the side right beside the idle. However the power jet is called a few different names. The 30 pict solex I have...

Finally got the 30 pict carb lined out and running nice. Idles at 800 smoothly and pulls strong through all the gears. After setting for around 48 hrs, I pumped the throttle twice, hit the starter and instant idle at 800 with a big cam sound, after it warms up it idles very smooth. Ended up with...

I'm trying a h30/31 right now. Seems to start right up, revs good to redline, but it idles for just a second around 1000 rpm then just dies. Pump the throttle a couple times fires right up but again dies. After warmed up say a short ride it idles a bit longer but still dies like it runs out of...

Just my luck

Thank you

How do I find him?

I have a stock setup but I was hoping the single carb would be less hassle What is an average cost to have a rebuildable set done by Mark?

Thank you, If I ever decided to go with a 2 barrel would I be able to use the intake I have? Do they make an adapter to put a 2 barrel on a single barrel intake? What 2 barrel are you running on your and are you pleased with it?

I picked up a 1978 GL 1000 a few weeks ago, that's been setting for who knows how many years. I bought the intake for a single 1 barrel carb and after reading several post on all kinds of issues, mainly idling issues I'm not sure which one to buy along with what jet's to swap to. I live in...

What jet size did you wind up with that ran the best

I figured out that I had the seal with the hole in the center installed in the wrong place. Works now without leaking. However for future reference if I ever need to replace what will replace it?

I rebuilt the rear master cylinder and its still leaking from the plunger. I'm leaning towards replacing it, what will work in its place without modifying a lot? This bike has set for many years and I'm trying to have it road ready for my oldest son. So far I've spent over 2k in parts and have...