Search results

I use a good silicon grease on those pins. It also helps keep the moisture out so they work easily for a long time. If cleaning the float pins doesn't do the trick then you will need to rebuild or replace the rear caliper.

A few pics of the machine in question...

The bike has 48K miles on it. Don't get me wrong its not a museum piece but it looks to be pretty sweet. Ive only seen pictures and he sent me a video of the bike running.

Merry Christmas and Happy New Year, Long time no speak, but I stalk often. I have a question for everyone. I have the possibility of purchasing a Black 1984 gl1200 Standard. The bike is in what I would consider to be very nice condition. Garage kept, same owner for 22 years, clean, titled...

Also I like to figure out where the start of the thread is on the cap, that point right when they want to fit together; mark that with a sharpie. Then when you are pushing down on that spring you at least know where the threads want to fit together to help also eliminate the possibility of a...

+1 :yes: Start at the highest point and work down from there.

I don't even want to veture a guess as to what I have in the yellow monster but it has been worth every cent. The bike puts a smile on my face every time I look at it. And you just can't beat the smiles per gallon it gets.

That bolt get torqued to a very high value of 58-69 ft.lbs. If you cannot get it torqued to that it will continue to come lose. I would avoid putting lock-tight on that piece, or at least not the "permanent" type anyway. If it continues to come lose and knock you could damage the stator, then...

I see the problem, you are missing 3 carburetors! :smilie_happy: What type of ignition is on it? If it still has points check the gap on those as well. When I first got my 76 it needed carb work, which I meticulously did myself and then the bike still didn't run properly. One of my points...

Nice find Joel, I'm sure you will be happy with that bike.

Welcome to classics. Well, it can't be all bad, at least it runs some. Thats half the battle. Any pics or videos would be super helpful to the folks here.

Thick white smoke to me sounds like coolant, but hard to tell for sure. When it comes to head gaskets I am a big supporter of getting OEM Honda crap, instead of after market who knows wtf it was made...crap. If you don't care one way or the other I have a set of head gaskets I can make you a...

He did mention that he is going to make some engineering changes to the tool to try and make it work better and overcome the clearance issues it currently has. That's what the forum is all about. A community of like minded individuals working together for the greater good.

Looks to me like your well on your way and plenty capable of having success. What kit are you using to rebuild? I would stay away from replacing any jets, floats, or needle valves. Only replace the o-rings and other rubber bits IMHO. Odds are many of those rubber bits were probably still good...

I would just like to way in on this topic of the timing belt cover wrench... Randakk reached out to me to try and make me a satisfied customer. Yesterday we communicated and he fully refunded the money for the wrench, which I did not ask for. In no way did I feel persecuted or demeaned for my...

I would just wire it up so the fan is always on and be done with it. Certainly wont hurt anything. At least then you can ride it until we get the issue solved.

A solid point. A randakk kit does not come with new floats, needles, jets, or any of those things. It only comes with all the orings and gaskets that you need for a good seal and to stop leaks. I purchased an entire second rack on ebay for like $40 for some of the internal parts. Disassembly and...

A nice piece of copper in there would be perfect. That lil wind screen looks nice on Hooch Joe... :good:

The randakk carb kits are worth every penny when it comes down to trying to do the job right on the first try. Ive used 3 of them on different bikes with perfect results each time. Take your time and go through them and you will be a happy guy. The video is a nice option as well if your a first...

I hope you bought a genuine Honda line gasket....Anything less is a waste of time and money.