I would like to build a new headlight circuit from scratch. I would use an on-off-on marine grade rocker switch. One "on" would be low beam, the other "on" would be high beam. I would use "off" when starting the bike. I would use a relay to get power to the headlamp. But that's just my idea. I do not know how exactly to wire this up and where and how to use a relay or whether I need a second relay. i would need to provide a power source to the on-off-on switch to power the relay(s). I don't think I could run this rocker switch with raw power, thus the relays. If someone could draw up a diagram, I would be eternally grateful.
Recap: On-off-on rocker switch to control the headlights bypassing the OEM controls. Getting power from the battery for the lights. Using relays so the on-off-on rocker switch merely powers the relays.
Recap: On-off-on rocker switch to control the headlights bypassing the OEM controls. Getting power from the battery for the lights. Using relays so the on-off-on rocker switch merely powers the relays.