my wing is done

Help Support ClassicGoldWings:

rock42

Well-known member
CGW Supporter
Joined
Jan 20, 2010
Messages
487
Reaction score
0
Location
waco, texas
for those that have helped me on getting my wing back on the rode i want to say thank you and u know who u r. i want to thank aapple for the picture of the filter i got one today and new fuel lines. filled tank with fuel and in 30 seconds she fired up and is running great with my new filter and lines and of course the new carbueters. will take it for a run in a day or two want to be sure everything is tight and all is good. will let u all know how it goes. and again thanks for all the help its good to have her back. :yahoo: :yahoo:
 

MarkB

Well-known member
Joined
Dec 19, 2011
Messages
567
Reaction score
0
Location
Redlands, CA
Congratulations!! Just in time to work the kinks out before prime riding season!

Mark
 

Omega Man

Well-known member
Moderator
CGW Supporter
Joined
Dec 3, 2009
Messages
6,676
Reaction score
1
Location
Sin City, Nevada
"Get your motor runnin...
Head out on the Highway!"
...looking for adventure,
in whatever comes our way! :mischief:

~O~
 

Winger 82

Well-known member
Joined
Dec 11, 2009
Messages
1,600
Reaction score
2
Location
Meadville,Pa.
What ~O~ said

:music2: :music2: :music2: :music2: :clapping: :clapping: :clapping: :clapping: :music2: :music2: :music2: :music2:
 

AApple

Well-known member
Administrator
Moderator
CGW Supporter
Joined
Dec 3, 2009
Messages
8,997
Reaction score
57
Location
Duncanville, Texas
My Bike Models
1981 GL1100 Innerstate("The Turd"), 1996 GL1500 Innerstate
:yahoo: :party: :Egyptian:
Get ready for some time time! :moped: And yes..we gotta see some pics! :beg:
 

rock42

Well-known member
CGW Supporter
Joined
Jan 20, 2010
Messages
487
Reaction score
0
Location
waco, texas
after my first test ride i will try to send pictures, however i really don't know how to go about putting pictures on here. i know someone explained it once but not sure where to go look for it. and thanks for all those that replied back nice to know all were there for me in this endever.
 

rock42

Well-known member
CGW Supporter
Joined
Jan 20, 2010
Messages
487
Reaction score
0
Location
waco, texas
ok, just took wing out for first run. ran good through all the gears and up to 50 mph after that when i give it throttle it boogs down. throttled slowly up to 70mph but runs rough and not much power, still boogs down. so back to the drawing board, i know for sure it is not the carbs so must be in ign or timing.
 

dan filipi

Well-known member
Staff member
Administrator
Moderator
CGW Supporter
Joined
Dec 3, 2009
Messages
22,099
Reaction score
71
Location
Van Nuys Ca.
My Bike Models
1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
My Bike Logs forum link
https://classicgoldwings.com/forums/dan-filipi.122/
I had a similar problem under load in high gear, turned out to be running too rich on one cylinder....back into the carbs.
How I figured it wasn't ignition is it would run fine all the way to redline in the lower gears but when holding the brakes it would bog past a certain throttle.
Problem turned out to be a flakey float needle not closing at the correct level.
 

Latest posts

Top