after painting my mufflers on my wing and before i started to put them back on i noticed a oil leak where the suspension and prop shaft bolt together. i checked bolt but they are tight. i can't find the seal on bike bandit or cheap cycles. they say unavaliable. the seal is 43x67x32 and there part number was 91267-371-003. here's the question. are they avaliable somewhere and is that where the ol leak is coming from. :thanks:
suspension-propeller oil seal
- Thread starter rock42
- Start date
Help Support Classic Goldwings:
hmmm you mean a seal where all bolta together ...ive never had a problem there ...it could be the shock leaking now that happens alot
- Joined
- Dec 3, 2009
- Messages
- 22,403
- Reaction score
- 238
- Location
- Van Nuys Ca.
- My Bike Models
- 1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
- My Bike Logs forum link
- https://classicgoldwings.com/forums/dan-filipi.122/
If your talking about the 3 bolts where the final drive bolts on I don't think there's a seal there.
If it is leaking from there I wonder if the grease liquified?
If it is leaking from there I wonder if the grease liquified?
- Joined
- Dec 3, 2009
- Messages
- 9,232
- Reaction score
- 262
- Location
- Duncanville, Texas
- My Bike Models
- 1981 GL1100 Innerstate("The Turd")SOLD!!, 1996 GL1500 Innerstate
Perhaps the seal on the final drive is leaking, and the gear lube is running forward? Ida know...just throwing out idears...
thanks for all the tips i will check shocks and also see if grease liquified and let everyone know. should be able to check today as the weather is warm enought to work on the bike.
