frankroche
Well-known member
Ok, I fixed up my 85 Aspencade, took off secondary air system, changed the choke cables, cleaned up the vacuum lines, removed the charcoal canister and synced the carbs.
Put it all back together and now it wants to go in 1st gear with the clutch pulled (but of course not in neutral)...
I thinking it could be fluid level in the clutch, and a check says it low but the sight glass looks like it's almost leaking. Last year the Brake Front MC started leaking out the sight glass and I changed it, and still works fine today, so I tried it but no real leaks. Since it is so s I ordered a replacement glass and will change it when I get it. At that time I will add/replace fluid.
Any other thoughts on this? I did also do the starter but removing the shift lever and replacing it shouldn't make the clutch drag.
Put it all back together and now it wants to go in 1st gear with the clutch pulled (but of course not in neutral)...
I thinking it could be fluid level in the clutch, and a check says it low but the sight glass looks like it's almost leaking. Last year the Brake Front MC started leaking out the sight glass and I changed it, and still works fine today, so I tried it but no real leaks. Since it is so s I ordered a replacement glass and will change it when I get it. At that time I will add/replace fluid.
Any other thoughts on this? I did also do the starter but removing the shift lever and replacing it shouldn't make the clutch drag.