Here is a Tech Reference for the carbs listed;
This thread should be a Tech Reference and for the Specs and Tuning and fault diagnosis, as well as other info regarding these carbs only.
1. Weber 32DFT & 32DFTA with 32/32 mm Throttle bores & 22/22 mm Venturi choke sizes
2. Weber 32/34DFT & 32/34DFTA 32/34 mm Throttle bores & 24/25 mm Venturi choke sizes
Weber/ Holley/Carter 32DFT & 32/34 DFT Carb Specs, jetting pictures for Tech Reference Page
Here is the jetting for My 32 DFT Carb Brand New from Tom Langdon:
Idle Jets
Primary .50
Secondary .60
High Speed Bleed
Primary 1.60
Secondary 2.20
Main Well Tube
Primary XD5
Secondary TD2
Main Jet
Primary 1.05
Secondary .95
Here is the jetting that I have on my 32/34 DFT Carb. it to was a brand new Carb, that I bought locally.
With the carb in your lap from left to right the jets are as follows
Idle Jets
Primary .60
Secondary .60
High Speed Bleed
Primary 150
Secondary 180
Main Well Tube
Primary XD5
Secondary TD4
Main Jet
Primary
Secondary
Here is some, Tuning info.
32DFT Tuning applies to all.
The 28/32 DCD is very similar in function and could be used as well,
Fault Diagnosis
Here is a 740/DFT Carb.'s Tech Reference Manual,
This manual has a lot of good Info in it.
Which is For the 32DFT and 32/34DFT & DFTA type Carbs.
Link
https://docs.google.com/file/d/0B85S9Tw ... edit?pli=1
This thread should be a Tech Reference and for the Specs and Tuning and fault diagnosis, as well as other info regarding these carbs only.
1. Weber 32DFT & 32DFTA with 32/32 mm Throttle bores & 22/22 mm Venturi choke sizes
2. Weber 32/34DFT & 32/34DFTA 32/34 mm Throttle bores & 24/25 mm Venturi choke sizes
Weber/ Holley/Carter 32DFT & 32/34 DFT Carb Specs, jetting pictures for Tech Reference Page
Here is the jetting for My 32 DFT Carb Brand New from Tom Langdon:
Idle Jets
Primary .50
Secondary .60
High Speed Bleed
Primary 1.60
Secondary 2.20
Main Well Tube
Primary XD5
Secondary TD2
Main Jet
Primary 1.05
Secondary .95
Here is the jetting that I have on my 32/34 DFT Carb. it to was a brand new Carb, that I bought locally.
With the carb in your lap from left to right the jets are as follows
Idle Jets
Primary .60
Secondary .60
High Speed Bleed
Primary 150
Secondary 180
Main Well Tube
Primary XD5
Secondary TD4
Main Jet
Primary
Secondary
Here is some, Tuning info.
32DFT Tuning applies to all.
The 28/32 DCD is very similar in function and could be used as well,
Fault Diagnosis
Here is a 740/DFT Carb.'s Tech Reference Manual,
This manual has a lot of good Info in it.
Which is For the 32DFT and 32/34DFT & DFTA type Carbs.
Link
https://docs.google.com/file/d/0B85S9Tw ... edit?pli=1