Recent content by gwhsr68

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. gwhsr68

    break out 1!!

    Nice ride. I'm glad you were able to enjoy it. Gary H.
  2. gwhsr68

    1100 front master cyl leaking

    Wipe everything down then sprinkle with a light coat of baby powder. The leak will show itself. Hope this helps. Gary H.
  3. gwhsr68

    Painting the "Slug"

    Nicely done. :good: Gary H.
  4. gwhsr68

    81 wing resto.. Perth western Australia

    Whichever bike you decide to build complete it'll be a good one for sure. Gary H.
  5. gwhsr68

    '78 - pinched another loaf - Johnny 5!

    You're doing a good job making Johnny 5 road worthy again.
  6. gwhsr68

    Project Bandit

    Any updates?
  7. gwhsr68

    Finally a GL-1200 owner...

    Welcome aboard. Gary H.
  8. gwhsr68

    '81GL1100 carb vac set screw @ #4.

    I pulled the black wires from the red right control connector in the bucket and made them bullet connect which provided 12v to the spark units. Then I rebuilt the '82 rack.The idle was hanging and after further inspection the choke tab was holding the throttle plates open.The bike now will...
  9. 20170311 114331

    20170311 114331

    Rebuild '82 rack.
  10. gwhsr68

    '81GL1100 carb vac set screw @ #4.

    Thanks Joe. Gary H.
  11. gwhsr68

    '81GL1100 carb vac set screw @ #4.

    The Randakk post repair kit was a success. Gary H.
  12. 20170308 161235

    20170308 161235

    The Randakk post repair kit was a success.
  13. gwhsr68

    '81GL1100 carb vac set screw @ #4.

    The '82 rack #4 has a broke float post. I ordered a post repair kit from Randakk. I cleaned the ignition assembly and replaced the contact plate. Then I disconnected the right control switch connector in the bucket and now there's 12.6v through the ignition switch. So I revisited the right...
  14. 20170306 000901

    20170306 000901

    I revisited the right control.
Top