Search results

Thanks, I want to keep it open. I'm going to grind out the mounting hardware and brackets. I'm trying to figure out how I want to position the air tanks. The shape of the backbone and the height of my drag bars are making it difficult.

Thanks for the advice guys, I'm going for it! I started out this morning making a tray out of the brass kick plate I picked up at the scrap yard. First, I made a cardboard template of the bottom. then traced it out. I folded it up and used copper rivets to hold it together. A little...

Well, the coil is off to Dynatek once again. I do have to say the tech support is really helpful. Larry suggested some troubleshooting and commented on a sketch of how I wired the ignition when I rewired the whole bike. There's always a silver lining though, right? Well, since she's parked, I...

Bad news... she's going to be parked for the season. I took her for a cold ride to work on Tuesday and shortly before I got there, she started acting up. I figured out that I wasn't getting any spark on cylinder 3 and a very weak spark on its mate, cylinder 4. This is the coil that tested good...

Don't worry too much. :help: The solution is to stock up on candy. Then, when they crowd the streets, very carefully give each one some candy and they will go away. :whistling: ...except those three that follow me around. It doesn't seem to matter how much candy I give them, they won't go...

After cleaning the rust out and rinsing them a bunch, I had to figure out how to seal up the holes I drilled in the end of the tanks. I don't know how to weld, so out came the torch and solder. Soldering to steel was something new for me. I soldered floor flanges for 1" pipe over the holes, and...