Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="danf" data-source="post: 50379" data-attributes="member: 2"><p>I may have come up with something that just may work on the cheap, my friend Todd who also did this conversion on his 1100 found a pulley and was thoughtful and nice enough to give me the information on the vehicle it came off of, It's a 4 groove 4" pulley off the power steering pump on a 1989 Honda prelude, He said it's a 12mm hole, I need to confirm, I thought about using a 5/8" socket then realized it has a step up so I will probably get the machine shop to just cut a spacer instead of make the whole pulley.. But a 5/8" socket with a cut keyway fits the hole but you could make a few welds and grind them to fit I bet for the step up, poorboy I am even more poor than you, well wait, didn't you start out with a lawn mower pulley, or was that someone else?...aaah :smilie_happy:</p></blockquote><p></p>