Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="user 92" data-source="post: 75058" data-attributes="member: 92">I didn't use any valves. I save the plastic cones from silicon tubes for vacuum plugs. I got 4 of those and cut off the tips and they slid right into the end of the hose. I could shove them in farther, but they won't slide back out. I drilled 1/16" in the point. Easier to drill the hole before I cut them off. If you are going to depend on adjustable valves, I think you're gonna need some way to calibrate them before you can use them.I just went ahead and bought the 5mm  fittings. Set of 4 in a bag about $10 from a local MC shop.I didn't use ATF, I was using the 4 water bottle trick.</blockquote>