Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="sevesteen" data-source="post: 93244" data-attributes="member: 3122">One of the few problems with my new GL1000 is that the low beam headlight doesn't work.  Has a Vetter fairing.  High beam works, and when I put a voltmeter on the low beam terminal with no bulb,  it shows just under 12 volts with the engine off, same as the high beam.  Tried a different bulb. Tested the headlight by hooking it to a battery with alligator clips, both high and low beams worked.   With the headlight hooked up properly, no light, no voltage.  I was hoping it was something with the socket, so a round meter probe made contact, but a flat headlight terminal didn't...so I stuck one terminal from the headlight into the low beam socket and measured (with the other two still disconnected) and got voltage.  Where do I check next?</blockquote>