Reply to thread

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Well, I took a close look at the carburetors today, and I found why the throttle screw was off the stop, the #3 carburetor, that had the accelerator pump on it, the throttle shaft for the carb was bent. After some slow and careful bending, it's straight and my idle adjustment is against the stop like it should be. Got carbs and air box in, and new choke and throttle cables connected. It has a electrical gremlin now, no power to the fuse panel, but I should be able to straighten it out easily enough. [ATTACH=full]50778[/ATTACH]


Top