Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="JohnB1953" data-source="post: 170682" data-attributes="member: 4066"><p>OK Am done for the weekend as have family time tomorrow so I thought I would post an update.Started taking the Triwing kit of the wrecked 81 and that went well .Took a little time and made a socket to get the jam nut off the left side swing arm on the replacement 81. That went real well and the socket fit and worked good. Will need it when I transfer the take off parts from the replacement 81.I am hoping to add a sidecar to that one but that is down the road aways. Now all things went ok on the replacement 81 until I got to taking the swing arm off .My question is why in the hell did they put that c clip on the end of the shaft? Once it is together where is it going to go? That was by far the worse part of the job. On the trike there wasn't  a c clip on that shaft and not sure if there should be and not sure if I should get one and put it on. Any ideas on that one guys?</p></blockquote><p></p>