Rednaxs60

Pidjones: Have the bike back together and looked at the composite log for the cam and crank signals. Pleased with the results, and no...

Progress with the new sensors. Have made brackets and installed the Hall effect sensors on the engine. Use the OEM 8 tooth crank...

Wiring update. Still using the OEM wiring harness to connect all the components. Keeps extra wiring to a minimum. Have a wiring...

Initially thought there was an issue with the OEM trigger wheel so went with the 36-1 crank trigger wheel and no cam signal. Learned...

Here are the traces: Cam trigger wheel at 3100 RPM: Crank OEM 8 tooth trigger wheel - 1100 RPM - with hall sensor: Crank OEM 8 tooth...

Today was template day. I have made the brackets and installed the cam and crank Hall effect sensors on the test engine, looks good. I...

Have some time to get the new sensors installed and switch back to the 8 tooth trigger wheel. Broken main spring on garage door, won't...

Checked the 36-1 crank trigger wheel as well. The oscilloscope trace is not as clean. I like and prefer the trace from the OEM 8 tooth...

Back at the testing. Received the DC power supply from Amazon. Used it today to bench test the Cherry GS100701 Hall effect sensors with...

Mentioned that I need one in the garage, but told Sonya I can wait until Xmas.

I had a 2021 RE Himalayan. 90 MPG, upgraded the suspension and changed the seat. Will have another one in a few years. Nothing like...

Just wanted to mention that I appreciate all the comments/suggestions that have been given, and the "likes" on this and my other threads...

Got a coffee cup warmer for my b'day. Have it sitting on the desk beside my computer. Keeps the coffee hot, good to the last drop. As...

Back from my sister's wedding and time to get their project moving again. This next trial period is going to be addressing the MAP...

Back from my sister's wedding in Ontario. Good trip, saw some new areas. Weather was good. For the ride back, bought a plug in...