Search results

Suzuki has a tool to measure fuel level in float bowls after assembly.

My 87 Interstate would start cold, but not hot., even with a jump, so I looked at the starter. The brushes were half the original length, and carbon dust was everywhere. I went to an automotive electrical shop and bought matching brushes for $10. I cleaned, regreased and reassembled the starter...

I have an 87 Interstate with oil leaking into the timing belt area. Can the seals be replaced with the cams installed, or do the cams have to be removed?

If the cams stop turning (broken cam belts) while the crank continues, pistons will hit open valves, causing damage to valves, valve guides, pistons, and possibly cylinder heads, etc.

Appears to be an Aspencade with a Poor Boy alternator. What year is it?

Yes, ABS glue, not PVC. Got it. Thanx for the links to your repairs, Brian. The Vetter fairing turned out great. I have done fiberglass repairs on my sailboat, so I have plenty of leftover glass mat. Thanx for all the help, guys. Now I will be able to salvage the bags and trunk.

OK, I'll check the bearing, and look for the glue. Thanx again!

Thanx, Joe. I searched the forums, but didn't find any suggestions. PVC plumbing glue? That should be simple. There is no missing plastic, just cracks. Is the rear wheel play caused by loose swing arm bearings? Thanx for the help.

Greetings fellow wing nuts, I hail from the burbs of Chicago. I'm here looking for advice and parts to get my new-to-me Gold Wing back on the road. My riding career was interrupted by life, jobs and my other hobby, sailing (just like riding, but MUCH slower). I used to work at local Honda...