Reply to thread

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Message: <blockquote data-quote="crowhorse" data-source="post: 88027" data-attributes="member: 2252">the 3 blade connector  is the wire harness for the neon coil pack the center blade feeds both coils  the yellow wire is for the front cyl 1&2 the blue/yellow is for the rear.. That was my understanding from steves site. I hope this helps...from steves site. Pretty simple really. The coil will sit in the frame with the plug terminals pointed to each side, the primary connector will face either left or right depending on how you mount it, pointing right seems to work best. There are 3 wires on the primary connector and 3 to the original coils. The black/yellow wire from the bike goes to the center wire, the yellow will go to the front wire in the coil plug, the blue to the rear. Then the plug wires go on, the front 2 plug wires go to the front coil terminals, the rear to the rear.also from steves..For 1 there is no ground wire on the coil pack. I am pretty sure all the neon coils are the same except some have round pin connectors and some have flat pins. The center wire is the hot wire (black/white on the bike harness), then The yellow wire goes to the front coil and the blue to the rear.Here is a diagram of the coil wiring, excuse the art work.<img src="https://www.classicgoldwings.com/forum/gallery/image.php?album_id=2025&image_id=20123" alt="" class="fr-fic fr-dii fr-draggable " style="" /></blockquote>