Is there more than one regulator in that panel? There is a big one there and a 7 volt under the fuel/temp/bat gauges, which started this side project. It was reading over 9 volts so I swapped it out with one i had in this 82 instrument cluster. That one reads a little over 7. I think there...
What am I missing? Can I get someone to post a pic of their inside left panel so I can see what it should look like? I think my book is showing an earlier model. Thanks.
Unfortunately yes it is. The starter bolts came out and as it turns out the top bolt was broken off in the case which inturn cause the lower to round out. I went to drill the bottom hole out and found out the hard way that the PO had JB welded a hole about 5/8ths inch in diameter, he took some...
Slabghost pointed out to me that I should hang onto this motor until I get the new one going. That's probably a good idea. I'll repost with a more detailed list when im ready for that.
The. Axel goes through the rotor covers and the brackets for the calipercovers mount to the top bolt of the calipers. One of The fork covers have a crack in it but its on the inside and not notice able. Those covers clamp around the forks at the top, at the seal and one bolt at the bottom that...
I figured they were amongst certain years. Maybe someday I'll be able to look at a bike and say with a doubt that's an '82. Guess I better get to studying :read: