Help Support Classic Goldwings:
-
-
Looking at the above underlined. My understanding is the Black/White is "hot" all the time, in normal operation. The Blue or Yellow is... -
DaveO430 replied to the thread Found something… pics coming soon!.Probably the starter solenoid stuck.
-
DaveO430 replied to the thread Found something… pics coming soon!.Did you try new coils, that is what was indicated by the test.
-
DaveO430 replied to the thread Found something… pics coming soon!.The black/white is from the kill switch, the blue & yellow are from the ignition control unit (it is NOT CDI). If there is power to the...
-
DaveO430 replied to the thread Found something… pics coming soon!.The yellow & blue wires should flash on & off, the black should remain on.
-
DaveO430 replied to the thread Carb trouble.They are junk, don't bother. Ever heard of punctuation?
-
DaveO430 replied to the thread Can't stop gas leaking past float needles.You can get good float needles here Misc Carb Parts for GL Models Special O-Rings and Seals , use the original seats. Randakks did have...
-
DaveO430 replied to the thread Tuning or cleaning? Be the sleuth!.Nothing at all, just don't use high octane fuel. Contrary to popular belief it is harder to ignite and slower burning. 10% ethanol won't...
-
I always found that genuine Honda gaskets with nothing else at all, worked best.
-
DaveO430 replied to the thread Tuning or cleaning? Be the sleuth!.Wrong, and quit using high test.
-
My my ...I've had all these motors ..my opinion is strait cut gears Honda did Is the biggest reason these oldwing motors lasted so long...
-
DaveO430 replied to the thread Shifting without clutch?.Then you should be able to see how the cut of the gears has no effect on the shifting.
-
DaveO430 replied to the thread Shifting without clutch?.Have you ever acually worked on a transmission?
-
DaveO430 replied to the thread Shifting without clutch?.That doesn't matter, the gears are in mesh all the time, it's the sliders that do the shifting.
-
DaveO430 replied to the thread Head gasket gl1000.Versa from what I heard is what Honda uses. I used a set once and they were good quality.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
