julimike54

Pidjones: Have the bike back together and looked at the composite log for the cam and crank signals. Pleased with the results, and no...

the old gas tank was full of rust, i cleaned it three times and the third cleaning revealed a pin hole in it so i ordered a new plastic...

Wiring update. Still using the OEM wiring harness to connect all the components. Keeps extra wiring to a minimum. Have a wiring...

I don't know how accurate 40 year old tach will be so I don't depend on one a 100%. My bike idles around 1100-1200 RPM. After warming...

Checked the 36-1 crank trigger wheel as well. The oscilloscope trace is not as clean. I like and prefer the trace from the OEM 8 tooth...

Welcome to The Forum and enjoy! Original is good....

Getting very close started working on the side bags also got the headers and mufflers mounted

Back from my sister's wedding in Ontario. Good trip, saw some new areas. Weather was good. For the ride back, bought a plug in...

https://classicgoldwings.com/media/albums/trunk-and-saddlebags.1484/ Looking through the parts list (above) the taillight parts are...

That is the original Light of the GL 1200 85’ LTD

That's an aftermarket light, I'm not familiar with that one. Maybe someone is aware of who makes that unit.

LIKE

I should have mentioned the method I used to both clean and lube the cables. I clamped a short piece of rubber hose onto the end of the...

Others will have other alternatives, but on mine, I used brake cleaner down into the cables first, and worked the cables back & forth a...

Almost done fired her for the first time today since the restore first time she's breathed oxygen in 20 years and yes I know the...