julimike54's latest activity
Help Support Classic Goldwings:
-
...it has happened. I had a heart attack(so they tell me) last week. I spent Saturday and Sunday installing the shift shaft pivot... -
julimike54 replied to the thread 76 goldwing.Welcome to The Forum and enjoy!
-
All handlebar control lines and switches tested (a couple repaired). Also all of the idiot lights and gauge illumination (those that...
-
Don't see many in black.
-
julimike54 replied to the thread wingleader potential.Welcome to The Forum and enjoy!
-
After a few trips over the past two years I've become hooked on getting out of town on the GL1200. At first it was going to the Indy...
-
julimike54 reacted to Motörhead's post in the thread Anyone else have trouble with goldwingparts.com? with
Like.
Parts arrived from UPS by way of USPS, weird. Perhaps that's why UPS tracking was off. Everything looks good, will put it away. For... -
julimike54 replied to the thread Anyone else have trouble with goldwingparts.com?.That's the kind of site that I wouldn't deal with, no physical address, no phone number. Myself if they don't have information like...
-
Bought some long 1/2” shrink tubing from Harbor Freight (only place I could find a long piece and not have to buy 100 ft). Fed left...
-
To install the springs on my shelter, the lid had to be fully up in order to set the springs with no tension.
-
julimike54 replied to the thread New Member.Welcome to The Forum and enjoy!
-
julimike54 reacted to AApple's post in the thread Shifter seal and lever support install. with Like.
Started the Green Weenie up for it's weekly wintertime firing, and checked to see if the new addition helped. Boy, did it!!! Quick...
-
julimike54 reacted to AApple's post in the thread Shifter seal and lever support install. with Like.
Onward thru the fog.... 🤪 Got it all trimmed, and put back together, and made sure it all worked as it should. Here we go... Exhaust...
-
Forum has been fairly quiet to date. Most of my posts to date have been more on the technical and theoretical side. This is because my...
-
julimike54 reacted to Rednaxs60's post in the thread 1985 GL1200 Limited ECU Replacement/Upgrade - Part 3 - Road Trials with Like.
Ignition timing always comes up. I have replaced the 8 tooth OEM crank trigger wheel with a 36 tooth trigger wheel - it was a 36-1...