Basic wiring

[oldgold80]

I am new here, and have a 1980 1100. I would like to know if anyone here has a basic wiring diagram. I have the engine on a stand and would like to be able to start it. Just a basic on/off and ignition is what iI would like. Thanks for any help.

 

[Dusterdude]

Welcome

Sent from my LM-X420 using Tapatalk

 

[joedrum]

You would think a basic wiring deal would be easy ...but its elusive pass the 1000 bike and the start of CDI ignitions

 

[oldgold80]

thank you, I understand that it may be a little complicated, but there has to be a solution somewhere. I can run a late model Harley using 4 or 5 wires, I just need a little guidance
with this engine.

 

[Dusterdude]

Yellow wire goes to the neg side of the 1/2 coil and the blue goes to the 3/4 coil.the black/white wires are the hot wires.I know there is a harness that goes to the pulse generator but I'm not near my bike atm.ill look at it in a little while

Sent from my LM-X420 using Tapatalk

 

[Dusterdude]

If you can see this,it will guide you

Sent from my LM-X420 using Tapatalk

 

[dan filipi]

Take a bit of doing since the 2 spark units are needed. Click the pic to make larger.

 

[Dusterdude]

True,if you don't have them,you can try the gm module trick

Sent from my LM-X420 using Tapatalk

 

[oldgold80]

Thanks a bunch, this helps, it will get me started in the right direction.

 

[Dusterdude]

Excellent

Sent from my LM-X420 using Tapatalk