Hello everyone, I am looking for some feed back on a problem with my GL1200 Aspencade. I think that my coil pack is bad. Here is what I know so far. The front 2 exhaust pipes are barely warm after a few minutes of start up and have took out the spark plug grounded it and hooked it up to the wire (at Night) to see if I could see a spark from he plug. NO Spark! Any other suggestions on what to check next or is the ingition coil? Thanks for all the advise.
GL1200 Running Problem
- Thread starter Poohman
- Start date
Help Support Classic Goldwings:
slabghost
Well-known member
could be wires or connectors to the coils or igniters or a bad sending unit. Broken wires between components.
sledge
Well-known member
OR......just bad Plugs.
if the front two plugs are not firing its a good idacator that the coil or ignition box or the igniters are in play....on the ignition side of things....the first thing to do is try and switch the coil wiring from one coil to the other ...and see if this move the spark to the front wires...
ddrichard
Well-known member
could be bad coil wires or bad ground to coil
