Problems with rear bearings

[Jungo]

Guys:
I'm replacing the rear tire and bearings of the Enterprise and I am following the procedure described in GoldwingsDocs. (Http://goldwingdocs.com/forum/viewtopic.php?f=11&t=74) So far everything has gone perfectly well, except for the replacement of the bearings. The pictures that appear in Goldwingdocs not resemble the rear tire that I have on the Enterprise. On the left side, where the brake disc, seems like it have a dust seal. I have no idea how to remove it to access the bearing. Any hint?

God bless.

20130817 210134

• Jungo
• Aug 17, 2013

20130817 210111

• Jungo
• Aug 17, 2013

 

[slabghost]

I use a flat ended bar and wedge it sideways about midway through the wheel then tap it with a hammer working my way around in circles until it pops out. The other side will be easier after the spacer and first bearing are out. Just had this on my 1200 front wheel.

 

[ianstaley]

I have been trying to get the front bearings out of my GL1000 and saw a good tutorial on Y tube, using a wall bolt. Go here.

https://www.youtube.com/watch?v=F7Y6MKTpW70

[video]https://www.youtube.com/watch?v=F7Y6MKTpW70[/video]