Cobra 427 V8

Light silver on the block , and some header paint on the exhausts , keep it tidy , it's yours don't worry about anyone else , it don't...

I put a relay on my ignition, it bolts on under left side shelter has got a decent fat feed from the battery and goes from there to...

Whelp, while my coworker was off grabbing his trailer for me, I rechecked the fuse that I put in place of the blown fuse. As soon as I...

That's a "never blow" fuse for sure. Got you home, but man that's risky. Let us know when you find the culprit.

Put a small piece of cardboard in the opposite set of points in the contact breaker gap , then time the other set , for static timing...

Hi , make sure you use a small bit of cardboard on one set of points when adjusting the other , you can actually get the timing...

My main earth cable was dirty in the connector, I have just boiled out the crud with a large soldering iron and used some Flux core .

About two times for me , some idle jet and air jet cleaning can be done in place , but if there gunked inside the bowls , most likely...

Exactly,I pulled 1975 GL carburetors 3 times and thoughly cleaned everything till I finally got it right,I rode my bike today,It still...

To quickly check running , petrol in a squirter bottle , remove air cleaner squirt into plenum, should be able to run if all else is ok...