1200 clutch maitenence ?

[joedrum]

ok this is my first hydro clutch ive dealt with ...im looking for all insight on how to piut brake fluil in my 1200 clutch master actualy its a 1500 clutch master im sure it makes no difference .....from a dry empty state line and all ..im sure there a simple way to do it ....so anyone with info good or bad please tell :mrgreen:

 

[backlander]

1. Top off the clutch master cylinder
2. place wrench on bleed screw
3. attach hose to bleed screw and cover opposite end in container with fluid
4. Squeeze lever several times until air bubbles quit rising from bleed holes in bottom of master cyclinder reservoir. Tap on sides of reservoir to loosen trapped air.
5. Hold lever in and loosen bleed screw to let air out at clutch end.
6. Wait several minutes and repeat until all air is gone.

Per Haynes manual for 86 GL 1200

Sounds like it's same as bleeding the brakes Joe.

 

[detdrbuzzard]

don't forget to bleed it from the slave cyl also

 

[joedrum]

we have clutch ....i manage to keep it off me ...thanks everyone

 

[slabghost]

Good job!