Can you tell me what this 83 gl1100I front shock boot is called ?

wilcoy02 · Apr 9, 2014

Can you tell me what this part of the shock tube is called so I can order.
looking at schematics is it part
#32 holder, boot
#29 boot,piston case
or some other number and name?

The one ring is the internal circlip and the other is what is left of the rubber I need to replace.

The rubber fits in around the hole.

joedrum · Apr 9, 2014

hope you can get that it seems to take a beating

zman · Apr 9, 2014

Well it is the anti dive system on the trac shock, when you hit the brakes the caliper bracket pushes on that ferel, the felel activated a valve..is that what you needed to know?

Ansimp · Apr 9, 2014

I think these are the parts that you require as I believe this is a breakdown of the trac unit.

83 GL1100a front fork parts

Ansimp
Apr 9, 2014

You should be able to get these through Western Honda

wilcoy02 · Apr 9, 2014

Yes it is the anti dive unit. I need to know which piece of rubber I need to replace. All the diagrams I have found I am not able to determine which I need.
Ansnip diagram I can not read either.

Thanks Dan. Tapped on pic and I can read real good.

Now which part goes to the outside?
Needing 4 at 7bucks turns into 28 bucks fast..

4 piston case boots --is what I need? Correct? #29

dan filipi · Apr 9, 2014

[url=https://www.classicgoldwings.com/forum/viewtopic.php?p=114468#p114468:2bj5vk4s said:
wilcoy02 » Wed Apr 09, 2014 6:18 pm[/url]":2bj5vk4s]
Yes it is the anti dive unit. I need to know which piece of rubber I need to replace. All the diagrams I have found I am not able to determine which I need.
Ansnip diagram I can not read either.

Wes, click on Ansimp's image. It will open in the gallery with a nice big readable pic.

Steve83 · Apr 9, 2014

The rubber part is the Piston Case Boot. The circlip is the Boot Holder. If you're doing both forks, you need 4 boots. The circlip goes on the outside, holding the boot in place.