ckahleer
Active member
I loosened the front bolt on the idler wheel about 1 turn. Loosened the back bolt just 1/4 turn and the belt got loose enough to remove the old belt and install the new one. When I tightened the rear bolt on the idler wheel, the belt got tight. This happened on both sides.
Maybe I'm over thinking this and all is well, but in my opinion the belts seem too tight. Does just tightening the idler wheel bolts back down automatically adjust for the correct tension?
Maybe I'm over thinking this and all is well, but in my opinion the belts seem too tight. Does just tightening the idler wheel bolts back down automatically adjust for the correct tension?