Need a 1983 Aspencade Rear Brake Proportioning Valve

[sw3dl1]

I'm in the process of restoring a low mileage (5K) 1983 Aspencade. The bike sat for 20+ years andthe brake system was toast. I've replaced all of the brake lines with steel braded lines, rebuilt all of the calipers and both master cylinders only to find the rear brake proportioning valve is leaking. I've looked for a rebuild kit but I don't believe any are available or made. The valve is discontinued from Honda and although the part is listed with several diffrent parts outlets on line as available, when it's ordered it comes back as "back-ordered" or "no longer available". I believe I'm going to have to find a good used one or change the brake configuration on the bike. Any help will be appreciated.

 

[joedrum]

look for 1200 part also im sure there a fix

 

[sw3dl1]

look for 1200 part also im sure there a fix

I'll take a look, thanks.

 

[dan filipi]

Send 1060dsl a PM or email, he may have one for your 83.