neutral switch (phillips head screw no more)

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flash2002

Well-known member
Supporting Member
Joined
Sep 18, 2012
Messages
367
Reaction score
0
Location
Montreal, Canada
Today I was trying to reconnect the wire for the neutral switch, is that a good place to screw a wire ? :rant: I thought Satan :evil: was going to appear, at one point. I played with that thing till I was blue in the face, then I said to my self, there must be a better way. So I took that stupid screw out and got a longer screw the same size, cut the screw about 1/2'', screwed it at the end of a small hose and was able to screw it at that angle, screwed it part way and then pulled the hose off. Now I was able to connect the wire and install a nut to hold it in place and tighten with a wrench :good: , a lot easier than playing with a stupid philips. I hope this might help a few people who might have the same problem.
 
Good idea if you can even do that. I needed to connect the neutral wire on a 1000 and saw no way I was ever going to be able to do it. What I did was line up a drill with the screw and drilled a hole through the lower engine mount on the frame so a phillips screwdriver would go straight on it.
 

Latest posts

Top