O ring gasket size

[Jungo]

Hi brothers. Can anyone help me to find the size of this gasket? The part number is : 16010-MG9-691
It's from a fuel junction pipe, for a 1984 OEM carb rack. Is the #1 on the picture.

Thanks in advance. J

20140516 095019

• Jungo
• May 16, 2014

20140516 095043

• Jungo
• May 16, 2014

gasket

• Jungo
• May 16, 2014

 

[dan filipi]

I think the simplest is try a transmission shop.

Also Pep Boys and Harbor Freight have O ring kits. Size may be in there, or close enough.

 

[joedrum]

i just replaced all that on a 1100 rack ....but the owner had rebuild kit ... just take the tube with you and try and find something

 

[backlander]

I got mine at the local Ace Hardware store, been working great for 4000 miles, took the old one and tube with me to get the right size.

 

[Jungo]

Thx guys. I took the pipe to a local auto parts and found a very similar gasket. It is one of the few times I have luck. I installed and make tests... is working nice. No more leaks. :good:

 

[zman]

Looks the same size as the 1100 tubes, if that is true then you can get them from cycle-recycle in Viton which would be better then a common rubber, I think Harbor Freight has a Viton seal kit too but not sure of the sizing.
Here`s the page for the orings #4617 and 4622.
https://www.newmotorcycleparts.com/fuel_ ... parts.html

 

[Jungo]

Thx for the info Jeff.

 

[toytender01]

Yep same source I used