BillVickery
New member
I have a 1980. I saw a decent system on e-bay for a 1983. Will it work?
replacing GL1100 exhaust
- Thread starter BillVickery
- Start date
Help Support Classic Goldwings:
- Joined
- Dec 3, 2009
- Messages
- 22,446
- Reaction score
- 265
- Location
- Van Nuys Ca.
- My Bike Models
- 1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
- My Bike Logs forum link
- https://classicgoldwings.com/forums/dan-filipi.122/
Welcome to the forums.
Yes, 80-83 GL1100 exhausts systems are all interchangeable.
Yes, 80-83 GL1100 exhausts systems are all interchangeable.
According to Honda parts fische, the 80 & 83 use OEM # 18300-463-010 for right side and the 80 & 83 use OEM # 18300-464-010 for the left side.However none of them are available from Honda. So on paper they should work but you have to be careful what you buy on ebay cause some of them sellers don't know what their selling when they list it. That's all I know to tell ya except Welcome to CGW.
- Joined
- Dec 3, 2009
- Messages
- 22,446
- Reaction score
- 265
- Location
- Van Nuys Ca.
- My Bike Models
- 1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
- My Bike Logs forum link
- https://classicgoldwings.com/forums/dan-filipi.122/
Good point Mike.
I would ask them to send you a fresh picture of what your getting since all the model, GL1000, 1100, and 1200 all look different and are easy to identify because of the differences.
Case in point. (Sort of)
I wanted to buy an electric cooling fan kit for my van.
I asked the seller a bunch of questions then asked for a picture installed on MY model van.
Turned out all his listings use generic pictures and he didn't have one of an actual installation so I passed.
I would ask them to send you a fresh picture of what your getting since all the model, GL1000, 1100, and 1200 all look different and are easy to identify because of the differences.
Case in point. (Sort of)
I wanted to buy an electric cooling fan kit for my van.
I asked the seller a bunch of questions then asked for a picture installed on MY model van.
Turned out all his listings use generic pictures and he didn't have one of an actual installation so I passed.
Welcome to Classics! I was always under the impression that any 1100 system fit an 1100. If all else fails, cut off your mufflers and install some Sportster Mufflers.
Welcome to CGW from Southern California!
- Joined
- Jan 27, 2013
- Messages
- 9,855
- Reaction score
- 34
- Location
- Brisbane Australia
- My Bike Models
- 1981 GL1100 “Rats Nest”
1998 GL1500c Val
1987 CBR1000f “The Pig”
1991 CBR1000f Red
Welcome from Oz
BillVickery
New member
Thank you for the information and the welcomes.
I see I've found a great resource to keep my ole gal alive and well.
Only paid $1000 for it, and put that much into it again. She is no show bike but runs extremely well. Smooth reliable ride.
Greetings from northern Pennsylvania.
I see I've found a great resource to keep my ole gal alive and well.
Only paid $1000 for it, and put that much into it again. She is no show bike but runs extremely well. Smooth reliable ride.
Greetings from northern Pennsylvania.
welcome to classic
Welcome from Oregon
Welcome from central Calif.
welcome from tenn.
carl62cycles
Well-known member
Welcome from Socal :hi: :hi: ,Harley exhaust would be a great replacement,old BMW"S and triumph seem to look pretty close match also but would need research :read: .
MordiRider
Active member
Harley Sporty (sportster) mufflers are often used
That's true...never liked the look much myself though.MordiRider":1k57ejc3 said:
Welcome to the forums.
~O~
