So WHERE does this plug go???

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

wilcoy02

Well-known member
Supporting Member
Joined
Feb 14, 2012
Messages
1,435
Reaction score
8
Location
Marengo, Ohio
Still trying to put the engine back in- The 2 prong plug goes on the fan. I have the temp sensor wired up, and oil sensor wired up.

But whAat plugs into this 4 prong plug? It is real close to the fan plug as there is only about 3 inches of wire from the fan plug.


The plug to the back of the pic at the 12 o clock position is the on e I need. The other plug is the fan plug.
plug 001.JPG

The plug with the red, blues,green showing
plug 002.JPG



Thanks
 
It looks like the engine harness plug. The temp sender, oil pressure switch and fan switch are attached to one end of the short harness, the other end goes into the this plug in the main harness.
 
but this plug is so close to the fan.
I tried not to unplug anything so this would not happen to me.

I do not see any main harness connection that this would go on.
 
[url=https://www.classicgoldwings.com/forum/viewtopic.php?p=98037#p98037:mot6f2kf said:
wilcoy02 » Mon Sep 30, 2013 12:36 pm[/url]":mot6f2kf]
but this plug is so close to the fan.
I tried not to unplug anything so this would not happen to me.

I do not see any main harness connection that this would go on.
I'll be home in a few hours can check it.
 
The engine harness (4 wires) and the fan (2 wires) both plug into the main harness very close to each other. Dig around a bit - it's there. The engine harness is the only one in that area with 4 wires.
 

Latest posts

Top