Del City is now offering Deutch Dt series electrical connectors for use in moisture and extreme heat locations. A two prong with all four pieces runs about 2.50 each. https://m.delcity.net/store/Deutsch-DT- ... 0.h_821871
Deutch Dt series connectors-Del city
- Thread starter backlander
- Start date
Help Support Classic Goldwings:
- Joined
- Dec 3, 2009
- Messages
- 11,041
- Reaction score
- 308
- Location
- Kingsport, Tennessee
- My Bike Models
- Former '82 GL1100 "The Slug"
Oh...sure...after I spent all that time and money on using the original style connectors! :cheeky: :smilie_happy:
I make up for this type of connector by using liberal amounts of dielectric grease. :hihihi:
I make up for this type of connector by using liberal amounts of dielectric grease. :hihihi:
OP
OP
I think the original style work fine with the grease. If I was to use the Duetch style it would only be for the stator three wire and the regulator to starter solenoid connector. I spent a ton of money also on origina style but I bought them as a kit and them ordered replacements as I use them so they are always on hand :smilie_happy:
- Joined
- Jan 27, 2013
- Messages
- 9,855
- Reaction score
- 34
- Location
- Brisbane Australia
- My Bike Models
- 1981 GL1100 “Rats Nest”
1998 GL1500c Val
1987 CBR1000f “The Pig”
1991 CBR1000f Red
I think that you will find that the fm style connectors ( original) are rated higher than 13amps.
