Master cylinder rebuild

[dlslick]

Sheesh !!!!!! Every time I do one of these I struggle with the darn snap ring ! It is so small and deep in there i just cant get any of my pliers in there. I just put it down for the night. Some times taking a break from it is the thing to do.

 

[mwbill37841]

know the feeling

 

[dan filipi]

Yeah, add the snap ring into the mix with brakes, that I already hate working on, and it adds up to one larger headache!

 

[joedrum]

yes tomarrow will be better

 

[slabghost]

I just push them in with a screwdriver.

 

[flash2002]

Whit the right tools, they come out eazy.

 

[dlslick]

Flash2002,,,, I agree and have almost every snap ring plier known to man in my tool box. Still couldn't get that one to budge. I have it soaking over night to see if it loosens up.

 

[flash2002]

When the clips are stuck, I use a fine center punch to grab the clip to break it loose, then I go with the clip pliers and pull it out. If you'r going to rebuild, you can always heat the part with a torch a bit, it might help.

 

[scdmarx]

Wait till you try to get the piston out past that build up. :doh:

 

[dlslick]

I know..... really looking forward to that. :clapping:

 

[joedrum]

i hate working on this stuff

 

[mwbill37841]

usally getting them out is not a problem it's getting them back in and staying

 

[dlslick]

GOT IT !!!
Should get the rebuild kit on Friday and put it back together this weekend.