I don’t know if anybody has had this problem but My low beam stopped working.
I used my ohm meter to check the headlight bulb & is has continuity on all contacts. So I check voltage & ground. Ground has 0 ohm, the high beam has 12 volts but the low beam only has from 8.7 volts to 10.9 volts. I have no idea why its fluctuating. I did open up the housing & sprayed contact cleaner on the switch but it did not change anything. :Awe:
I used my ohm meter to check the headlight bulb & is has continuity on all contacts. So I check voltage & ground. Ground has 0 ohm, the high beam has 12 volts but the low beam only has from 8.7 volts to 10.9 volts. I have no idea why its fluctuating. I did open up the housing & sprayed contact cleaner on the switch but it did not change anything. :Awe: