New oregon goldwing owner
Member
Replacing my valve cover gasket. On 1978 gl 1000 goldwing. Is it recommended to use sealant as well? Thxs
New gasket
- Thread starter New oregon goldwing owner
- Start date
Help Support Classic Goldwings:
It isn't mentioned in the manual that I recall, but some use a little Hondabond in the corners (sharp edge next to the bearings). I usually use Indian Head gasket "shellac" to hold the rubber gasket to the cover while installing the advantage to this product is that it is soluble in acetone, so easily removed. But, any way you do it - make sure the head and cover surfaces are clean first. Most of my issues with valve cover leaks have been the screw seals. New seals always fix it.
derrick woods
Well-known member
If you're using a new gasket no I definitely wouldn't use it cuz if you have to adjust your valves periodically as long as it dont leak I wouldn't use it
Replace the rubber grommets on the bolts as well. These do exert some pressure on the valve cover as well to keep them sealed. Get a set of 1500 grommets, same size.
derrick woods
Well-known member
It's been done awhile runs excellent no leaks
